FEATURES OF YOUR HYUNDAI
1- 69
H210B03O-AAT
sound will be attenuated). When the control
knob is turned clockwise, rear speaker sound
will be emphasized (Front speaker sound will
be attenuated).
and when the ( ) side is pressed, it will automa-
tically tune to the next lower frequency.
1.
POWER ON-OFF/VOLUME Control
Knob
6. PRESET
STATION SELECT Button
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Rotate
the knob clockwise to switch the radio unit on
and to increase the volume.
The LCD shows the radio frequency in the radio
mode. Turn the knob counterclockwise to re-
duce the volume and to switch the radio unit off.
Six (6) stations for AM, FM1 and FM2 respec-
tively can be preset in the electronic memory
circuit on this unit.
3.
BASS Control Knob
Press to pop the knob out and turn to the left or
right for the desired bass tone.
HOW
TO PRESET STATIONS
TREBLE Control Knob.
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then, by
simply pressing the band select button and/or
one of the six station select buttons, you may
recall any of these stations instantly. To pro-
gram the stations, follow these steps:
Pull the bass control knob further out. Turn to
the left or right for the desired treble tone.
BAL (Balance Control) Knob
Pull and turn the control knob clockwise to
emphasize right speaker sound (Left speaker
sound will be attenuated.). When the control
knob is turned counterclockwise, left speaker
sound will be emphasized (Right speaker sound
will be attenuated.).
4. BAND Selector
Pressing the
FAM
button changes the AM, FM1
and FM2 bands. The mode selected is dis-
played on LCD.
o
o
o
o
Press band selector to set the band for AM,
FM1, and FM2.
Select the desired station to be stored by
seek, scan or manual tuning.
Determine the preset station select button
you wish to use to access that station.
Press the station select button for more than
two seconds. A select button indicator will
show in the display indicating which select
button you have depressed. You should then
release the button, and proceed to program
the next desired station. A total of 18 stations
can be programmed by selecting one AM
and two FM stations per button.
After adjusting the balance, push the knob again
to use the other function.
5. TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase or to
decrease the frequency. With the button held
down for 1 sec. or more, the stop signal (broad-
casting radio wave) is ignored and channel
selection continues.
SCAN Knob
When the scan knob is pressed, the frequency
will increase and the receivable stations will be
tuned in one after another, receiving each sta-
tion for 5 seconds. To stop scanning, press the
scan knob again.
SEEK
Operation
(Automatic Channel Selection)
2
. FAD (Fader Control) Knob
Press the TUNE select button for 1 sec. or
more. When the ( ) side is pressed, the unit will
automatically tune to the next higher frequency
o
When completed, any preset station may be
recalled by selecting AM, FM1 or FM2 band
Turn the control knob counterclockwise to em-
phasize front speaker sound (Rear speaker
and the appropriate station
button.
| Categories | Hyundai Accent Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Accent 1.6 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Accent |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2003 Hyundai Accent Owners Manual 5.0 out of 5.0 based on 1 product reviews. Just bought Accent. Downloaded manual in seconds. Great free service.