VEHICLE MAINTENANCE REQUIREMENTS
F060A01A-AAT
EXPLANATION OF SCHEDULED
MAINTENANCE ITEMS
F060F01A-AAT
o Vacuum, Crankcase
Ventilation Hoses
F060J01A-AAT
o Spark plugs
Make sure to install new spark plugs of the
correct heat range.
Inspect the surface of hoses for evidence of
heat and/or mechanical damage. Hard and
brittle rubber, cracking, tears, cuts, abra-
sions, and excessive swelling indicate dete-
rioration. Particular attention should be paid to
examine those hose surfaces nearest to high
heat sources, such as the exhaust manifold.
Inspect the hose routing to assure that the
hoses do not come in contact with any heat
source, sharp edges or moving component
which might cause heat damage or mechani-
cal wear. Inspect all hose connections, such
as clamps and couplings, to make sure they
are secure, and that no leaks are present.
Hoses should be replaced immediately if there
is any evidence of deterioration or damage.
F060M01A-AAT
o Engine Oil and Filter
The engine oil and filter should be changed at
the intervals specified in the maintenance
schedule. If the car is being driven in severe
conditions, more frequent oil and filter changes
are required.
F060N02E-AAT
o Valve Clearance
Inspect excessive valve noise and/or engine
vibration and adjust if necessary. A qualified
technician should perform the operation.
F060C01A-AAT
o Fuel Filter
F060B01A-AAT
o Drive Belts
A clogged filter can limit the speed at which the
vehicle may be driven, damage the emission
system and cause hard starting. If an exces-
sive amount of foreign matter accumulates in
the fuel tank, the filter may require replace-
ment more frequently.
Inspect all drive belts for evidence of cuts,
cracks, excessive wear or oil saturation and
replace if necessary. Drive belts should be
checked periodically for proper tension and
adjusted as necessary.
After installing a new filter, run the engine for
several minutes, and check for leaks at the
connections. Fuel filters should be installed by
trained technicians.
F060G01A-AAT
o Vapor Hose and Fuel Filler Cap
The vapor hose and fuel filler cap should be
inspected at those intervals specified in the
maintenance schedule. Make sure that a new
vapor hose or fuel filler cap is correctly re-
placed.
F070C01A-AAT
o Engine coolant
The coolant
intervals specified in the maintenance sched-
ule.
should
be
changed at
the
F060D01A-AAT
o Fuel Lines, Fuel Hoses and
Connections
Check the fuel lines, fuel hoses and connec-
tions for leakage and damage. Have a trained
technician replace any damaged or leaking
parts immediately.
F060H01A-AAT
o Air cleaner filter
A Genuine Hyundai air cleaner filter is recom-
mended when the filter is replaced.
F060E01A-AAT
o Timingbelt
Inspect all parts related to the timing belt for
damage and deformation. Replace any dam-
aged parts immediately.
5-
6
| Categories | Hyundai Elantra Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Elantra 2.0 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4 out of 5)
Automotive readers have rated 2003 Hyundai Elantra Owners Manual 4.0 out of 5.0 based on 3 product reviews. it is wonderful manual thanks alot