FEATURES OF YOUR HYUNDAI
B230E01E-GAT
B230G03Y-AAT
Installation on Rear Seats
the child restraint system is securely installed.
If you need to tighten the belt, pull more web-
bing toward the retractor. When you unbuckle
the seat belt and allow it to retract, the retractor
will automatically revert back to its normal
seated passenger Emergency Locking usage
condition.
Installing a Child Restraint Seat with the
"Tether Anchorage" System (5 DOOR)
On rear seats
Blanking covers
NOTE:
o
Before installing the child restraint sys-
tem in any seating position, read the
instructions supplied by the child re-
straint system manufacturer.
Covering shelf
o
If the seat belt does not operate as de-
scribed, have the system checked imme-
diately by your authorized Hyundai deal-
er.
YR10400B
To install a child restraint system in the rear
seats, extend the shoulder/lap belt entirely
from its retractor until a "click" is felt. This will
engage the seat belt retractor automatic lock-
ing feature, which allows the seat belt to retract
but not extend. Install the child restraint sys-
tem, buckle the seat belt and allow the seat belt
to take up any slack. Make sure that the lap
portion of the belt is tight around the child
restraint system and the shoulder portion of the
belt is positioned so that it can not interfere with
the child's head or neck. Also, double check to
be sure that the retractor has engaged the
Automatic Locking feature by trying to extend
webbing out of the retractor. If the retractor is in
the Automatic Locking mode, the belt will be
locked. After installation of the child restraint
system, try to move it in all directions to be sure
WARNING:
o
Tether strap hook
Back panel
If the retractor is not in the Automatic
Locking mode, the child restraint system
can move when your vehicle turns or
stops abruptly.
Do not install any child restraint system
in the front passenger seat. Should an
accident occur and cause the passenger
side airbag to deploy, it could severely
injure or kill an infant or child seated in
an infant or child seat. Therefore, only
use a child restraint system in the rear
seat of your vehicle.
o
Front of Vehicle
B230E01E
Three child restraint hook holders are located
on the vertical back panel.
To install a child restraint seat, remove the
blanking covers on the covering shelf.
Connect the child restraint tether strap hook to
the child restraint hook holder through the hole
on the covering shelf.
1-
18
| Categories | Hyundai Elantra Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Elantra 2.0 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4 out of 5)
Automotive readers have rated 2003 Hyundai Elantra Owners Manual 4.0 out of 5.0 based on 3 product reviews. it is wonderful manual thanks alot