6 DO-IT-YOURSELFMAINTENANCE
18
CHANGING THE AIR FILTER
G140D01A-AAT
B140E01E-AAT
Checking the Compressor Drive Belt
(For Evaporator and Blower Unit)
(IfInstalled)
A/C
The air filter is located in front of the evaporator
unit behind the glove box.
0.315
in. (8 mm)
It helps to decrease pollutants from entering the
car and to filter the air.
TENSION PULLEY
CRANK PULLEY
HXD2097
G140D01A
2. Remove the mounting bolts with the socket
wrench, and then detach the mounting
bracket.
When the air conditioning is being used regu-
larly, the compressor drive belt tension should
be checked at least once a month with the
engine turned off.
To check the drive belt tension, press down on
the belt halfway between the engine crankshaft
and compressor pulleys. Pressing with your
finger, you should not be able to deflect this belt
anymore than 1/3 of an inch. If you have the
instruments to check it, with a force of 22 lb.
HXD2096
1. Open the glove box and remove the adjust-
ing pins on both sides of the glove box.
(98N),
the deflection should be 0.315 inches
(approx 8.0 mm). If the belt is too loose, have it
adjusted by your Hyundai dealer.
HXD2098
| Categories | Hyundai Elantra Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Elantra 2.0 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 2 out of 3)
Automotive readers have rated 2004 Hyundai Elantra Owners Manual 2.0 out of 3.0 based on 2 product reviews. I bought this used and the battery isn't completely dead but it won't start and my key won't work in the trunk to get to the spare tire, because I also have a flat.
good review