298
WHATTODOINEMERGENCIES
nu ts until each nu t has been tightened twice. Correct
wheel nu t tightness is 130 N·m (95 ft. lbs). If in doubt
abou t the correct tightness, have them checked with a
torqu e wrench by you r authorized dealer or at a service
station.
WARNING!
Raisingthevehiclehigherthannecessarycanmake
thevehiclelessstableandcauseanaccident.Itcould
slipoffthejackandhurtsomeonenearit.Raisethe
vehicleonlyenoughtoremovethetire.
10.
Lower the jack to it’s fully closed position.
6.
Remove the lug nu ts and wheel.
WARNING!
7.
Position the spare wheel/ tire on the vehicle and install
Aloosetireorjack,thrownforwardinacollisionor
hard stop could endanger the occupants of the ve-
hicle.Alwaysstowthejackpartsandthesparetirein
theplacesprovided.
lug nu ts with cone-shap ed end tow ard wheel. Lightly
tighten the nu ts. To avoid the risk of forcing the vehicle
off the jack, do not tighten the nu ts fully until the vehicle
has been lowered .
8.
and rem ove the jack and wheel blocks.
Lower the vehicle by turning the jack screw to the left,
11.
tions.
Secure the tire, jack, and tools in their prop er loca-
9.
Finish tightening the lug nu ts. Push down on the
wrench while tightening for increased leverage. Alternate
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)