To program the vehicle to a different mode, use the
following procedure:
Programmable Modes
Mode 1: ON
1.
2.
3.
Enter the personalization portion of the SETUP
menu following the instructions listed previously.
Mode 2: OFF
Turn the TUNE/SEL knob until DELAYED LOCKING
is highlighted.
Before your vehicle was shipped from the factory, it was
programmed to Mode 2. The mode to which the vehicle
was programmed may have been changed since it
left the factory.
Press the TUNE/SEL knob to switch back and forth
between on and off.
To program the vehicle to a different mode, use the
following procedure:
When the mode is turned on, a check mark will
appear next to the feature name.
1.
Enter the personalization portion of the SETUP
menu following the instructions listed previously.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
2. Turn the TUNE/SEL knob until LOCK PASS
WINDOW is highlighted.
Lock Passenger Window
3. Press the TUNE/SEL knob to switch back and forth
between on and off.
This feature allows you to disable either all the passenger
window switches or the rear passenger window switches
only. If this feature is turned on, all passenger window
switches will be disabled when the window lockout button
is pressed. If the feature is off, only the rear passenger
window switches will be disabled. See Power Windows
on page 2-15 for more information.
When the mode is turned on, a check mark will
appear next to the feature name.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
3-81
| Categories | Cadillac CTS Manuals, Cadillac Manuals |
|---|---|
| Tags | Cadillac CTS 2.8, Cadillac CTS 3.6, Cadillac CTS 6.0 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)