3.
4.
5.
Remove the eight mounting nuts from the underside
of the trunk lid by turning the nuts counterclockwise.
Windshield Wiper Blade
Replacement
Pull the lamp assembly away from the vehicle
to expose the bulb sockets.
Windshield wiper blades should be inspected for wear
or cracking. See Owner Checks and Services on
page 6-9.
Turn the bulb socket one-quarter turn
counterclockwise and pull the bulb and socket out
of the lamp reflector.
It’s a good idea to clean or replace the wiper blade
assembly on a regular basis or when worn. For proper
windshield wiper blade length and type, see Normal
Maintenance Replacement Parts on page 6-15.
6.
Pull the old bulb from the bulb socket keeping the
bulb straight as you pull it out.
7.
8.
Install a new bulb.
To replace the wiper blade assembly, do the following:
Reverse the steps to reinstall the lamp assembly.
1.
2.
Turn the ignition to ON with the engine off.
Replacement Bulbs
Turn on the windshield wipers and turn them off
again when the wipers are in the out-wipe position.
The driver’s side blade will be straight up and
down on the windshield.
Exterior Lamp
Back-Up, Front/Rear Turn Signal,
Stoplamp and Taillamp
Fog Lamp
License Plate Lamp
Rear Sidemarker Lamp
Bulb Number
3157K
3.
Pull the windshield wiper assembly away from the
windshield.
9145
W5WLL
2825 L/W5WL
For replacement bulbs not listed here, contact
your dealer.
5-56
| Categories | Cadillac CTS Manuals, Cadillac Manuals |
|---|---|
| Tags | Cadillac CTS 2.8, Cadillac CTS 3.6, Cadillac CTS 6.0 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)