THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
17
NOTE:
System serviced , brin g all veh icle keys with you to the
dealer.
When havin g the Sen try Key Immobilizer
4. Insert a blank Sentry Key into the ignition switch and
turn the ignition switch ON within 60 second s. After 10
second s a single chim e will sou nd . The Theft Alarm Light
will stop flashing, turn on for 3 second s; then turn off.
2
Customer Key Programming
You can program new sentry keys to the system if you
have two valid sentry keys by perform ing the follow ing
proced ure:
The new Sentry Key has been program med. The Keyless
Entry Transmitter will also be program med durin g this
proced ure. Repeat this proced ure to program up to a
total of 8 keys. If you do not have a program med sentry
key, contact you r dealer for details.
1.
Cut the additional Sentry Key Transp ond er blank(s) to
match the ignition switch lock cylind er key code.
NOTE: If a program med key is lost, see you r dealer to
2.
Insert the first valid key into the ignition switch and
have all rem aining keys erased
from the system s
turn the ignition switch ON for at least 3 second s but no
longer than 15 second s. Turn the ignition switch OFF and
rem ove the first key.
memory. This will prevent the lost key from starting you r
vehicle. The rem aining keys must then be rep ro-
gram med. All vehicle keys must be taken to the dealer at
the time of service to be rep rogram med.
3.
Insert the second valid key and turn the ignition
switch ON within 15 second s. After ten second s a chim e
will sou nd and the Theft Alarm Light will begin to flash.
Turn the ignition switch OFF and rem ove the second key.
| Categories | Chrysler Manuals, Chrysler Pacifica Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)