Jump Starting
Proceed as follows:
Important!
If the battery is discharged, the engine
should be started with jumper cables
and the (12 V) battery of another
vehicle.
1. Position the vehicle with the charged
battery so that the jumper cables will
reach, but never let the vehicles touch.
Make sure the jumper cables do not
have loose or missing insulation.
3. Clamp one end of the first jumper
cable to the positive (+) terminal of
the discharged battery and the
other end to the positive (+)
terminal of the charged battery.
Make sure the cable clamps do not
touch any other metal parts.
The battery is located in the trunk
behind the right-hand cover panel.
2. On both vehicles:
Warning!
• Turn off engine and all lights and
accessories, except hazard warning
flashers or work lights.
4. Clamp one end of the second
jumper cable to the grounded
negative (-) terminal of the charged
battery and the final connection to
the negative (-) terminal of the
discharged battery. Make sure the
cables are not on or near pulleys,
fans, or other parts that will move
when the engine is started.
Failure to follow these directions
will cause damage to the electronic
components, and can lead to a
battery explosion and personal
injury.
• Apply parking brake and shift
selector lever to position "P".
Read all instructions before
proceeding.
108
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Owner's Manual Download. |
| Tags | Mercedes-Benz 300SE, Mercedes-Benz 400SE, Mercedes-Benz 500SEL, Mercedes-Benz W140 |
| Model Year | 1992 |
| Download File |
|
| Document File Type | |
| Publisher | mbusa.com |
| Wikipedia's Page | Mercedes-Benz W140 |
| Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2)
Automotive readers have rated 1992 Mercedes-Benz 300SE 400SE 500SEL W140 Owners Manual 2.0 out of 2.0 based on 1 product reviews.