2016 Hyundai H350 Owners Manual

What to do in an emergency
Jump starting procedure
Proceed to connect one end of the
other jumper cable  to the negative
terminal of the  booster battery (3),
then the  other end  to a solid,  sta-
tionary, metallic point (for example,
the  engine   lifting   bracket)  away
from the  negative battery  terminal
(4). Do not connect it to or near any
part that moves when the engine is
cranked.
(Continued)
If  the  AGM  battery  is  recon-
nected or  replaced, ISG func-
tion  will not  operate  immedi-
ately.
CAUTION
AGM battery (if equipped)
Absorbent  Glass  Matt  (AGM)
batteries    are   maintenance-
free  and we  recommend  that
the system be  serviced by an
authorized   HYUNDAI  dealer.
For  charging  your  AGM  bat-
tery, use  only  fully automatic
battery chargers that  are spe-
cially developed  for AGM bat-
teries.
If  you  want   to  use  the  ISG
function,  the   battery  sensor
needs   to  be   calibrated   for
approximately   4  hours   with
the ignition off.
Do not  allow the jumper  cables to
contact anything except the correct
battery   terminals  or   the  correct
ground. Do  not lean  over the  bat-
tery when making connections.
During  the   period,  the   dark
current must be under 100 mA.
1.Make  sure the  booster  battery  is
12-volt and that  its negative termi-
When replacing  the AGM bat-
tery, we  recommend that  you
use   parts   for    replacement
from  an authorized  HYUNDAI
dealer.
CAUTION
nal is grounded.
2.If
the booster battery  is in another
vehicle, do not allow the vehicles to
touch.
Battery cables
Do   not   connect   the   jumper
cable from the negative terminal
of  the   booster  battery  to   the
negative   terminal  of   the   dis-
charged battery. This can cause
the discharged  battery to  over-
heat  and  crack,  releasing  bat-
tery acid.
3.Turn off  all unnecessary  electrical
loads.
Do  not  open  or  remove   the
cap on top of the  battery. This
may  cause  leaks  of   internal
electrolyte that could result in
severe injury.
4.Connect  the jumper  cables in  the
exact sequence shown in  the illus-
tration. First connect  one end of  a
jumper cable  to the positive termi-
nal of  the main  fuse box (1),  then
connect the  other end to the  posi-
tive terminal on the booster battery
(2).
(Continued)
6-6
Product Specification
Categories Hyundai Manuals, Hyundai h350 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 473 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, H350
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field