Windshield Washer Fluid Mixing
Ratio
Blocked Windshield Wiper
Signaling Turns with Hazard
Flasher in Use
If the windshield wiper becomes
blocked (for example, due to snow),
switch off the wiper motor.
For temperatures above freezing:
For example, when the vehicle is
being towed:
MB Windshield Washer Concentrate
"S" and water
For safety reasons before removing ice
or snow, remove key from steering
lock. Remove blockage.
With hazard flasher on, activate
combination switch for left or right
turn signal - only the selected turn
signal will blink.
1
part "S" to 100 parts water
ml "S" to 1 gallon water).
(40
Activate combination switch again
(key in steering lock position 1).
For temperature below freezing:
Upon canceling the turn signal, all four
turn signals will operate again.
MB Windshield Washer Concentrate
"S" and commercially available
premixed windshield washer
solvent/antifreeze
Emergency Operation of
Windshield Wiper
Turn Signal Failure
In case of windshield wiper
malfunction, turn combination switch
to wiper setting II.
If one of the turn signals fails, the turn
signal indicator system flashes and
sounds at a faster than normal rate. In
addition, the exterior lamp failure
indicator will come on.
1 part "S" to 100 parts solvent
(40 ml "S" to 1 gallon solvent),
Have the system checked at your
authorized MERCEDES-BENZ dealer
as soon as possible.
Windshield Wiper Smears
If the windshield wiper smears the
windshield, even during rain, activate
the washer system as often as
necessary. The fluid in the washer
reservoir should be mixed in the correct
ratio.
57
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Auto Owner's Manual Download. |
| Tags | Mercedes-Benz 600SEL, Mercedes-Benz W140 |
| Model Year | 1993 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)