Controls and features
Powe r door unlock /lock
pr oce du re
You must complete steps 1-5 within
30
seconds or the procedure will
have to be repeated. If the
procedure needs to be repeated,
you must wait 30 seconds.
1.
2.
3.
4.
5.
6.
Turn the ignition key to ON.
Press the power door unlock control three times.
Turn the ignition key from ON to OFF.
Press the power door unlock control three times.
Turn the ignition back to ON. The horn will chirp.
Press the unlock control, then press the lock control. The horn will
chirp once if autolock was deactivated or twice (one short and one long
chirp) if autolock was activated.
7.
Turn the ignition to OFF. The horn will chirp once to confirm the
procedure is complete.
Keyle ss entry key pa d pr oce du re
1.
2.
3.
4.
Enter 5 digit entry code
Press and hold 7/8 control
Press and release 3/4 control
Release 7/8 control.
The user should receive a hor n
chir p to indicate the system has
been disabled or a chirp followed by
a honk to indicate the system has
been enabled.
Smart unlock
This feature prevents the driver’s door from locking while the key is in
the ignition. This feature will unlock only the driver’s door if the key is in
the ignition cylinder, the driver’s door is ajar and all doors are locked
using the interior trim switch. If these conditions are met, the entire
vehicle will lock and the driver’s door will unlock within 1 second.
127
| Categories | Ford Explorer Manuals, Ford Manuals |
|---|---|
| Model Year | 2002 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)