Practical hints
Flat tire
Removing the wheel
Warning!
G
Insert the jack arm fully into the jack sup-
port tube hole up to the stop. Otherwise the
vehicle may fall from the jack and cause per-
sonal injury or damage to the vehicle.
̈
Keeping jack in this position, turn
crank 5 clockwise until the jack’s small
platform 6 meets the ground. Make
sure that the jack is always vertical
(plumb line).
3
4
5
6
7
Jacking pin
Jack support tube hole
Crank
Small platform
Large platform
1 Alignment bolt
̈
̈
̈
Unscrew upper-most wheel bolt and re-
move.
̈
Jack the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the
ground.
Replace this wheel bolt with alignment
bolt 1 supplied in the tool kit.
̈
Fold out jacking pin 3 in direction of
arrow A until it snaps into place.
The jack is now standing on large
platform 7.
Remove the remaining bolts.
The green marking on the jacking pin
should now form one line with the
marking on the jack.
!
Never start engine while vehicle is
raised.
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
̈
Insert jacking pin 3 in direction of
arrow B fully into jack support tube
hole 4.
୴୴
240
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SLK-Class Manuals |
|---|---|
| Tags | Mercedes-Benz SLK230, Mercedes-Benz SLK32 AMG, Mercedes-Benz SLK320 |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2003 Mercedes-Benz SLK230 SLK320 SLK32 AMG Owners Manual 5.0 out of 5.0 based on 1 product reviews. I can't express how very grateful I am for this service. Buying a used car without the original manual can be very frustrating and your assistance - for FREE - can't be too highly praised!