2004 Hyundai Terracan Owners Manual

CONTROLS AND  EQUIPMENT
SB090H1-E
B170A04A-EAT
WARNING:
o
CARE OF  SEAT BELTS
HEIGHT  ADJUSTABLE FRONT  SEAT
The height adjuster must be in the locked
position when the vehicle is moving.
The misadjustment of height of the shoul-
der belt could  reduce the effectiveness
of the seat belt in a  crash.
Seat  belt  assemblies  must  never be  disas-
sembled or  modified in  any way.  In addition,
care should be exercised to ensure that the belt
assemblies do not become damaged by being
trapped in seat mechanisms, door shuts etc.
SHOULDER BELT  (Not all  models)
o
SB090I-E
Periodic  Inspection
SB090P1-E
SEAT BELTS  (3-Point Type)
It is recommended that all seat belts be inspect-
ed periodically for wear or damage of any kind.
Parts of the  system that are damaged should
be  replaced as  soon  as possible.  Under  no
circumstances must  any part of  the seat  belt
assemblies be dismantled or repaired.
To Fasten  The Seat  Belt
B170A01HP.DAG
You can adjust the height of  the shoulder belt
anchor to one of the 4 positions.
SB090J1-E
Keep Belts  Clean and  Dry
If the height of the adjusting seat belt is too near
your  neck, you  will  not  be getting  the  most
effective protection. The shoulder portion should
be adjusted so that it lies across your chest and
midway over  your shoulder  nearest the  door
and not your neck.
To adjust  the height  of the  seat belt  anchor,
lower or raise the height adjuster into an appro-
priate position. To raise the height adjuster, pull
it up. To lower it, push it  down whilst pressing
the height adjuster button.
Seat belts should be kept clean and dry. If belts
become dirty, they can be cleaned using a mild
soap solution  and  warm water.  Bleach, dye,
strong detergents  or abrasives should not  be
used since  the fabric  may become damaged
and weakened.
B180A01L-D
The seat belts are fastened by pulling the belt
buckle towards the seat belt stalk and inserting
the metal  tongue of the  buckle into the  stalk.
The buckle  should be firmly  pressed into  the
stalk until locked which will be indicated by an
audible "click".
The  length of  the  seat  belt webbing  will  be
automatically adjusted by the seat belt mecha-
nism to allow the wearer maximum freedom of
SB090K1-E
Replacement of  Seat  Belts
The entire  seat belt  assembly or  assemblies
should  be  replaced if  the  vehicle  has  been
involved in  an accident even if  no damage is
evident. Additional questions  concerning seat
belt operation should be directed to a Hyundai
Dealer.
Release  the  button  to  lock  the  anchor  into
position. Try sliding the release button to make
sure that it has locked into the position.
1-
17
Product Specification
Categories Hyundai Manuals, Hyundai Terracan Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 361 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Terracan
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field