Bulb Replacement
BUMPER MOUNTED LIGHTS
(Fog guard & reverse lights)
To re-fit the light unit to the bumper, first locate
the hooks ‘C’ in the bumper aperture and firmly
push the other side of the light against spring
pressure until it clicks into place.
C
NUMBER PLATE LIGHTS
B
A
H2499
H4394
Remove both screws to release the light unit.
Ease the light unit from its recess and pull the
bulb to remove.
WARNING
If the engine is warm, the exhaust system
may be hot - to prevent personal injury, avoid
contact with a hot exhaust system when
reaching behind the bumper.
Reach behind the bumper and press the spring
clip ‘A’ to release the light unit.
Squeeze both levers ‘B’ to release the bulb
holder from the lens. Push and twist to release
the bulbs.
NOTE: If necessary, the light unit can first be
detached from the electrical harness by
releasing the multi-plug from the rear of the
bulb holder.
Replace the required bulb and re-fit the holder
to the light unit.Before reassembling the light
unit, make sure the seal (between holder and
lens) is in place.
233
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 2004 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Discovery Handbook |
| Product Brand | Land Rover |
| Applicable to Country | International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)