Topping off engine oil
BMW engines are designed to operate
without additives, and their use could
even lead to damage in some cases.<
Viscosity ratings
Viscosity is the oil flow rating as defined in SAE
classes.
The selection of the correct SAE class depends
on the climatic conditions in the area where you
typically drive your BMW.
Wait until the level has dropped to just above
the lower dipstick mark before adding oil. When
it falls to this level, a message also appears on
the Control Display.
Approved oils are in SAE classes 5W-40
and 5W-30.<
These oils may be used for driving in all ambient
temperatures.
Refill the oil within the next 125 miles/
200
result.<
km, otherwise engine damage could
Coolant
Store oil, grease etc., well out of the reach
of children; always observe all warning
labels on the containers.<
Do not open the cooling system when the
engine is hot. Escaping coolant can cause
burns.<
Coolant consists of water and coolant additive.
Not all commercially available additives are suit-
able for your BMW. Ask your BMW center for
suitable additives.
Oil change
Have oil changes carried out only by a BMW
center.
Only use suitable additives, as otherwise
engine damage may result. The additives
present a health hazard.<
Specified engine oils
The quality of the engine oil selected has critical
significance for the operation and service life of
an engine. BMW continuously approves spe-
cific oils after confirming their suitability for use
in its vehicles with extensive testing.
Always observe all applicable environ-
mental laws and regulations when dis-
posing of used coolant additives.<
Use only approved BMW High Performance
Synthetic Oil.
Checking coolant level
If you are unable to obtain BMW High Perfor-
mance Synthetic Oil, you can add small
amounts of another synthetic oil between oil
changes. Use only oils with the API SH specifi-
cation or higher.
Ask your BMW center for details concern-
ing the specific BMW High Performance
Synthetic Oil or synthetic oils which have been
approved.<
1.
The engine must be at ambient tempera-
ture.
You can also call BMW of North America at
1-800-831-1117 or visit this website:
www.bmwusa.com to obtain this information.
176
Online Edition for Part-No. 01 41 0 158 445 - � 09/04 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Automotive readers have rated 2005 BMW 6-Series 645Ci E63 E64 Owners Manual 4.0 out of 5.0 based on 2 product reviews. Good car. Runs well. Rim wheels problems.