Controls in detail
Lighting
Daytime running lamp mode
Canada only:
USA only:
̈
Turn exterior lamp switch to
position M or U.
The daytime running lamp mode is manda-
tory and therefore in a constant mode.
By default, the daytime running lamp mode
is deactivated. Activate the daytime run-
ning lamp mode using the control system,
see “Setting daytime running lamp mode”
When the engine is running, the low
beam headlamps are switched on.
Vehicles with automatic transmission*:
When the engine is running, and you shift
from a driving position to position N or P,
the low beam headlamps will switch off
with a three-minute delay.
(୴ page 137).
In low ambient light conditions, the
following lamps will switch on
additionally:
When the engine is running, and you turn
the exterior lamp switch to
position C or B, the manual head-
lamp mode has priority over the daytime
running lamp mode.
When the engine is running, and you
ț
ț
ț
Tail and parking lamps
License plate lamps
Side marker lamps
ț
turn the exterior lamp switch to
position C, the parking lamps
switch on additionally.
The corresponding exterior lamps switch
on (୴ page 110).
For nighttime driving, you should turn the
exterior lamp switch to position B to
permit activation of the high beam head-
lamps.
ț
turn the exterior lamp switch to
position B, the manual headlamp
mode has priority over the daytime run-
ning lamp mode.
i
The corresponding exterior lamps
switch on (୴ page 110).
With the daytime running lamp mode
and the exterior lamp switch in
position M you cannot switch on the
high beam headlamps.
The high beam flasher is available at all
times.
112
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)