2007 Hyundai H 1 Grand Starex Owners Manual

44
IN CASE OF EMERGENCY
12
D060I01P-GAT
. Lower Vehicle and Tighten
Nuts
Tightening torque:
E060J01A-AAT
After changing wheels
8
Front
Rear
12
to 14 kg.m
to 137 N.m,
12 to 14 kg.m
(118 to 137 N.m,
87 to 101 lbs.ft)
18 to 22 kg.m
(177 to 216 N.m,
130 to 159 lbs.ft)
Minibus,
Van
(118
87
18
to 101 lbs.ft)
to 22 kg.m
Truck
(177 to 216 N.m,
130
to 159 lbs.ft)
HSRFL065
HSRFL064
If you have  a tire gauge, remove the
valve cap and check the air pressure.
If the  pressure is  lower than  recom-
mended, drive  slowly to  the nearest
service station and  inflate to the cor-
rect pressure. If it is too high, adjust it
until it is  correct. Always reinstall the
valve cap after checking  or adjusting
tirepressure.Ifthecapisnotreplaced,
air may leak from the tire. If you lose a
valve cap, buy another and install it as
soon as possible.
Lower the car to the ground by moving
the jack  handle up  and  down. Then
position the  wrench as shown  in the
drawingandtightenthewheelnuts.Be
sure the socket  is seated completely
over  the  nut.  Do  not  stand  on  the
wrench  handle or  use  an extension
pipe over the wrench handle.
Go around the wheel tightening every
other nut until they are all  tight. Then
double-check each  nut for tightness.
After changing wheels, have a techni-
cian  tighten the  wheel  nuts  to their
proper torque as soon as possible.
After you  have  changed wheels,  al-
wayssecuretheflattireinitsplaceand
return the jack, jack handle, and tools
to their proper storage locations.
Product Specification
Categories Hyundai Manuals, Hyundai H-1 Grand Starex Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 284 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Grand Starex
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field