Maintenance
Disc brake pads should be inspected
for wear whenever tires are rotated.
Wheel alignment and tire
balance
Tread wear indicator
Rotate radial tires that have an
asymmetric tread pattern only
from front to rear and not from
right to left.
The wheels on your vehicle were
aligned and balanced carefully at the
factory to give you the longest tire life
and best overall performance.
In most cases, you will not need to
have your wheels aligned again.
However, if you notice unusual tire
wear or your vehicle pulling one way
or the other, the alignment may need
to be reset.
If you notice your vehicle vibrating
when driving on a smooth road, your
wheels may need to be rebalanced.
WARNING
Do not use the temporary
spare tire for tire rotation
•
•
2GHA5032
Do not mix bias ply and radial
ply tires under any circum-
Tire replacement
If the tire is worn evenly, a tread wear
indicator will appear as a solid band
across the tread. This shows there is
less than 1.6 mm (1/16 inch) of tread
left on the tire. Replace the tire when
this happens.
Do not wait for the band to appear
across the entire tread before replac-
ing the tire.
stances. This
may
cause
unusual handling characteris-
tics that could result in death,
severe injury, or property
damage.
✽ NOTICE
Improper wheel weights can dam-
age your vehicle's aluminum wheels.
Use only approved wheel weights.
7
28
| Categories | Kia Amanti Manuals, Kia Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)