Compact Disc Operation
The radio's station recall buttons,
If the optional dealer-installed CD
changer is connected to your system,
it can be operated via the same keys
that control the radio and cassette
player.
During this procedure, the display
panel will read LOAD M if in CD
mode. Once the CD changer cycles
through the discs in the magazine,
the first CD will play.
numbered
1FM
through
0AM,
function as CD disc-select buttons as
well. To play the disc in the CD
magazine's fourth compartment, for
example, press button 4FM.
The same instructions that govern
volume, tone and balance in the
radio and cassette modes apply to the
CD mode as well. However, some
system functions and procedures are
exclusive to the CD mode.
Ejecting the CD Magazine: To
eject the magazine from the CD
changer, press the CD port door lock
to open the magazine port door.
Press the magazine eject button
inside
the
port
door
and
the
magazine will automatically slide
halfway out of the magazine port;
remove the magazine manually and
close the port door.
Loading the CD Magazine and CD
Changer: The CD changer is inside
the car's trunk. Its magazine will
accept up to ten discs. Insert the
discs
compartments with the label surface
facing up.
into
the
magazine
To Play CDs: First, turn on the
radio. Press the mode button once or
twice, depending on the operating
mode set before, until CD appears on
the display. If the CD magazine has
not been inserted into the CD
changer or if there are no discs in the
CD magazine, the display will
indicate CD-M-E, meaning CD
Magazine Empty.
When the magazine is loaded, place
it into the CD changer port. An
arrow on the top surface of the
magazine indicates which end should
be inserted first. When you feel the
magazine lock snugly into position
in the port, close the port door.
1432.doc
10
| Categories | Car Audio and Video |
|---|---|
| Tags | Mercedes-Benz Becker |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)