Warning!
Adding Coolant.
•
Use extreme caution when opening
If coolant has to be added, a 50/50
mixture of water and MB
anticorrosion / antifreeze should be
added.
the hood if there are any signs of
steam or coolant leaking from the
cooling system.
•
Do not remove pressure cap on
coolant reservoir if engine
temperature is above 90°C
300 SE:
The drain plugs for the cooling system
are located on the right side of the
engine block and" at the bottom of the
radiator.
(194°F).
Allow engine to cool down
before removing cap. The coolant
reservoir contains hot fluid and is
under pressure.
400
SEL, 500 SEL:
•
•
Using a rag, turn cap to first notch
to relieve excess pressure. If
opened immediately, hot scalding
fluid and steam will be blown out
under pressure, possibly causing
personal injury,
Checking Coolant Level
The drain plugs for the cooling system
are located on the right and left sides of
the engine block and at the bottom of
the radiator.
To check the coolant level, the vehicle
must be parked on level ground and the
engine stopped.
Anticorrosion/antifreeze, see
Coolants in Index
Check coolant level only when coolant
is cold:
Do not spill antifreeze on hot
engine parts. Antifreeze contains
ethylene glycol which may burn if
it comes into contact with hot
engine parts. You can be seriously
burned.
The coolant should reach the rib in the
filler neck.
97
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Owner's Manual Download. |
| Tags | Mercedes-Benz 300SE, Mercedes-Benz 400SEL, Mercedes-Benz 500SEL, Mercedes-Benz W140 |
| Model Year | 1993 |
| Download File |
|
| Document File Type | |
| Publisher | mbusa.com |
| Wikipedia's Page | Mercedes-Benz W140 |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 1993 Mercedes-Benz 300SE 400SEL 500SEL W140 Owners Manual 4.0 out of 4.0 based on 1 product reviews.
Comments are closed.