For safety reasons, avoid adjusting the
seat or seat back into positions which
could affect the correct seat belt
position.
Unfastening of Seat Belts
Push the release button (3) in the belt
buckle (2).
Allow the retractor to completely
rewind the seat belt by guiding the
latch plate (1).
Notes:
The rear seat belt buckles can be stored
in the space next to the rear armrest (to
the left and right of armrest). The rear
center seat belt should be latched and
stored under the armrest.
1
2
3
Latch plate
Buckle
Adjust seat belt so that shoulder
portion is located as close as possible
to the middle of your shoulder. Do not
twist the belt.
The shoulder portion of the seat belt
must be pulled snug and checked for
snugness immediately after engaging
it.
Release button
Fastening of Seat Belts
For cleaning and care of the seat belts,
see Upholstery in Index.
Push latch plate (1) into buckle (2) until
it clicks.
Operation:
The lap belt should be positioned as
low as possible on your hips and not
across the abdomen.
The height setting for the shoulder
portion of the front seat belts are
automatically adjusted by the fore/ aft
movement of the front seat.
Seat moved to front: Belt outlet fully
lowered.
The inertia reel stops the belt from
unwinding during sudden vehicle stops
or when quickly pulling on the belt.
Three-point seat belt:
Tighten the lap portion to a snug
fit by pulling shoulder portion up.
Rear center seat belt: Tighten to a snug
fit by feeding belt toward retractor.
The locking function of the reel may be
checked by quickly pulling out the belt.
Seat moved to rear: Belt outlet fully
raised.
47
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Auto Owner's Manual Download. |
| Tags | Mercedes-Benz 600SEL, Mercedes-Benz W140 |
| Model Year | 1993 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)