10.
Clean contact surfaces of
wheel and wheel hub. Install
spare wheel on wheel hub.
Insert wheel bolts and tighten
them slightly.
13. Fold wrench together and
tighten the five bolts evenly,
following the sequence
illustrated above, until all bolts
are tight.
Before storing the jack, the jack arm
must be lowered almost to the base of
the jack. Store the spare wheel first and
then the vehicle jack.
Warning!
To avoid paint damage, place
wheel flat against hub and hold it
there while installing first wheel
bolt.
Observe a tightening torque of 110
Nm (80 ft.lb.).
Incorrect mounting bolts or
improperly tightened mounting bolts
can cause the wheel to come off. This
could cause an accident Be sure to
use the correct mounting bolts.
14. Correct tire pressure.
Unscrew the alignment bolt to
install the last wheel bolt.
Important!
When installing new wheels the
mounting bolts must be retightened
after approx. 100 to 500 km (60 - 300
miles).
12.
Lower car. Remove jack and
insert jack tube cover.
103
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Owner's Manual Download |
| Tags | Mercedes-Benz S600, Mercedes-Benz W140 |
| Model Year | 1995 |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)