Adjusting Headlamp
1. Park vehicle on level surface
approximately 6 inches
(152 mm) from a vertical test
screen or wall. The centerline of
the vehicle must be at a 90°
angle to the test screen.
3. Move vehicle on the level
surface 25 feet (7.6 m) straight
back from the wall.
4. Open hood, depress latch (1)
and remove access cover (2)
from the headlamp.
5. Turn key in steering lock to
position 2.
Correct headlamp adjustment is
extremely important. To check and
readjust a headlamp do the following:
•
Horizontal aim will change
and must be corrected as
described below, whenever a
vertical adjustment is made.
Adjustments to low beam
simultaneously aim the high
beam and fog lamp.
2. Using a "T" square and a
carpenter's level, align and mark
a vertical centerline (10) on the
test screen using the outer
reference point (low beam)
found on each headlamp lens.
As a check, the distance
6. Vertical headlamp aim
(low beams on):
•
•
Turn adjusting screw (3) (coun-
terclockwise to adjust headlamp
downward, clockwise upward) until
bubble in the level (4) is centered on
the "0" mark.
Vehicle should have a normal
trunk load.
between centerlines should be
52 /8 inches (1328 mm).
3
Graduations: 0.18° pitch.
116
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free Auto PDF Owner's Manual Download. |
| Tags | Mercedes-Benz 320SE, Mercedes-Benz 420SEL, Mercedes-Benz 500SEL, Mercedes-Benz W140 |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)