1997 Mercedes-Benz S500 S600 W140 Owners Manual

Adding Coolant.
Warning!
If coolant has to be added, a 50/50
mixture of water and MB
anticorrosion / antifreeze should be
added.
Use extreme caution when opening
the hood if there are any signs of
steam or coolant leaking from the
cooling system.
The drain plugs for the cooling system
are located on the right and left sides
of the engine block and at the bottom
of the radiator.
Do not remove pressure cap on
coolant reservoir if engine
temperature is above 90°C (194°F).
Allow engine to cool down before
removing cap. The coolant
reservoir contains hot fluid and is
under pressure.
Anticorrosion/antifreeze, see
Coolants in Index
Coolant reservoir of S 600 shown
Using a rag, turn cap to first notch
to relieve excess pressure. If
opened immediately, hot scalding
fluid and steam will be blown out
under pressure, possibly causing
personal injury,
Checking Coolant Level
To check the coolant level, the vehicle
must be parked on level ground and the
engine stopped.
Check coolant level only when coolant
is cold.
•  Do not spill antifreeze on hot
engine parts. Antifreeze contains
ethylene glycol which may burn if
it comes into contact with hot
engine parts. You can be seriously
burned.
The coolant should reach the top of the
tab inside the filler neck.
99
Product Specification
CategoriesMercedes-Benz Manuals, Mercedes-Benz S-Class Manuals
Document TypeFree Auto PDF Owner's Manual Download
Tags, ,
Model Year1997
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 153 pages
Document File TypePDF
Publisherbayhas.com
Wikipedia's PageMercedes-Benz S-Class
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Automotive readers have rated 1997 Mercedes-Benz S500 S600 W140 Owners Manual 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

1997 Mercedes-Benz S500 S600 W140 Owners Manual SKU UPC Model
agustin lopez on Feb 03, 2015.

very good information to fix my problem