DRIVING YOUR HYUNDAI
C020A01A-AAT
NOTE:
o "START"
The engine is started in this position. It will
crank until you release the key.
BEFORE STARTING THE ENGINE
Before you start the engine, you should always:
o
For safety, the engine will not start if the
shift lever is not in "P" or "N" Position.
The ignition key cannot be turned from
"ACC" position to "LOCK" position un-
less the shift lever is in the "P" (Park)
position or the negative battery terminal
is disconnected from the battery. To re-
move the key, always confirm that the
shift lever is securely positioned in "P"
(Park).
o
1.
Look around the vehicle to be sure there are
no flat tires, puddles of oil, water or other
indications of possible trouble.
NOTE:
Do not hold the key in the "START" position
for more than 15 seconds.
2.
After entering the car, check to be sure the
parking brake is engaged.
o "ON"
3.
4.
Check that all windows, and lights are clean.
Check that the interior and exterior mirrors
are clean and in position.
When the key is in the "ON" position, the
ignition is on and all accessories may be turned
on. If the engine is not running, the key should
not be left in the "ON" position. This will dis-
charge the battery and may also damage the
ignition system.
o
For additional information about start-
ing, see page 2-3.
5.
Check your seat, seatback and headrest to
be sure they are in their proper positions.
Lock all the doors.
Fasten your seat belt and be sure that all
other occupants have fastened theirs.
Turn off all lights and accessories that are
not needed.
When you turn the ignition switch to “ON”,
check that all appropriate warning lights are
operating and that you have sufficient fuel.
6.
7.
C040A01A-AAT
KEY POSITIONS
o "ACC"
With the key in the "ACC" position, some elec-
trical accessories (radio etc.) may be operated.
WARNING:
8.
9.
The engine should not be turned off or the
key removed from the ignition key cylinder
while the vehicle is in motion. The steering
wheel is locked by removing the key.
o "LOCK"
The key can be removed or inserted in this
position.
10.Check
the operation of warning lights and all
bulbs when key is in the “ON” position.
To protect against theft, the steering wheel
locks by removing the key.
ON
ACC
C030A01L-AAT
COMBINATION IGNITION SWITCH
To Start the Engine
Place the shift lever in “P” (park) and de-
press the brake pedal fully.
To start the engine, insert the ignition key
and turn it to the "START" position. Release
it as soon as the engine starts. Do not hold
the key in the "START" position for more
than 15 seconds.
NOTE:
START
To unlock the steering wheel, insert the key,
and then turn the steering wheel and key
simultaneously.
o
LOCK
o
YR20010A
2-
2
| Categories | Hyundai Grandeur XG Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai XG300 3.0 |
| Model Year | 2001 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, XG300 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 2 out of 3)
Automotive readers have rated 2001 Hyundai Grandeur XG300 3.0L Owners Manual 2.0 out of 3.0 based on 3 product reviews. I need fucking pdf amir can idiot
Comments are closed.