Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Garage door opener
186
For operation in the USA only: This device complies
with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
3. Using both hands, simultaneously push the hand-
held transmitter button (3) and the desired
integrated remote control button (1). Do not release
the buttons until completing step 4.
(1) This device may not cause harmful interference, and
4.
The indicator lamp on the integrated remote control
will flash, first slowly and then rapidly. When the
indicator lamp flashes rapidly, both buttons may be
released (the rapid flashing lamp indicates
successful programming of the new frequency
signal). To program the remaining two buttons,
follow steps 1 through 4.
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Any unauthorized modification to this device could void
the user’s authority to operate the equipment.
Programming or reprogramming the integrated
remote control:
Note:
If after repeated attempts, you do not successfully
program the integrated remote control device to learn
the signal of the hand-held transmitter, the garage door
opener could be equipped with the “rolling code
feature”.
1.
2.
Turn electronic key in starter switch to position 1
or 2.
Hold the end of the hand-held transmitter of the
device you wish to train approximately 2 to 5 inches
(5
cm to 12 cm) away from the surface of the
integrated remote control located on the inside rear
view mirror, keeping the indicator lamp (2) in view.
Product Specification
Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes Benz W463, Mercedes-Benz G500 |
Model Year | 2002 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
excelente material para los amantes de mercedes clase g