WHAT TO DO IN AN EMERGENCY 3- 7
D060D01A-AAT
D060E01A-AAT
D060F02E-AAT
3.
Loosen Wheel Nuts
4. Put the Jack in Place
5. Raising the Car
Wrench bar
Wheel nut
wrench
D060D01O
D060E01O-1
HFC4022
The wheel nuts should be loosened slightly
before raising the car. To loosen the nuts, turn
the wrench handle counterclockwise. When
doing this, be sure that the socket is seated
completely over the nut so it cannot slip off. For
maximum leverage, position the wrench so the
handle is to the left as shown in the drawing.
Then, while holding the wrench near the end of
the handle, push down on it with steady pres-
sure. Do not remove the nuts at this time. Just
loosen them about one-half turn.
The base of the jack should be placed on firm,
level ground. The jack should be positioned as
shown in the drawing.
After inserting a bar into the wheel nut wrench,
install the bar into the jack as shown in the
drawing. To raise the vehicle, turn the wheel nut
wrench clockwise. As the jack begins to raise
the vehicle, double check that it is properly
positioned and will not slip. If the jack is on soft
ground or sand, place a board, brick, flat stone
orotherobjectunderthebaseofthejacktokeep
it from sinking.
Raise the car high enough so that the fully
inflated spare tire can be installed. To do this,
you will need more ground clearance than is
required to remove the flat tire.
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Tags | Hyundai Santa Fe 2.4, Hyundai Santa Fe 3.5 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(5 votes, average: 4.4 out of 5)
Automotive readers have rated 2003 Hyundai Santa Fe Owners Manual 4.4 out of 5.0 based on 5 product reviews. Great to have this for repair jnformation
perfect i love this manual. i require this informaiton to fix my car.
Comments are closed.