Practical hints
Towing the vehicle
!
G
i
Warning!
To be certain to avoid a possibility of
damage to the drive train, however, we
recommend the drive shaft be discon-
nected at the rear axle drive flange
(vehicles with 4MATIC*: disconnected
at the front and rear axle drive flanges)
for any towing beyond a short tow to a
nearby garage.
To signal turns while being towed with
the hazard warning flasher in use, turn
key in starter switch to position 2 and
activate the combination switch for the
left or right turn signal in the usual
manner – only the selected turn signal
will operate.
If circumstances require towing the vehicle
with all wheels on the ground, always tow
with a tow bar if:
ț
ț
the engine will not run
there is a malfunction in the power
supply or in the vehicle’s electrical
system
Upon canceling the turn signal, the
hazard warning flasher will operate
again.
as that will be necessary to adequately
control the towed vehicle.
Prior to towing the vehicle with all wheels on
the ground, make certain that the key is in
starter switch position 2.
If the key is left in starter switch position 0
for an extended period of time, it can no
longer be turned in the switch. In this case,
the steering is locked. To unlock, remove
key from starter switch and reinsert.
309
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C240, Mercedes-Benz C32 AMG, Mercedes-Benz C320, Mercedes-benz W203 |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.75 out of 5)
Automotive readers have rated 2003 Mercedes-Benz C-Class Operators Manual C230 Kompressor Sport C240 C320 4MATIC and Sport C32AMG 4.8 out of 5.0 based on 4 product reviews. Excellent description and technical writing. Thanks.
Very good
and greAt pdf
Strongly recommend