88
Dynamic Stability Control (DSC) – 325xi
The concept
The vehicle will remain completely
operational, however, without DSC. In
the event of a fault, please consult your
BMW center.
DSC maintains vehicle stability, even in
critical driving situations.
DSC is operational every time you start
the engine.
DSC incorporates the Automatic Differ-
ential Brake (ADB-X) and Cornering
Brake Control (CBC) functions.
Indicator lamps
The indicator lamp in the instru-
ment cluster goes out shortly
after you switch on the ignition,
refer to page 19.
To deactivate DSC
Press the DSC button; the indicator
lamp comes on and remains lit.
>
The indicator lamp flashes: DSC con-
trols the drive and braking forces
The indicator lamp stays lit: DSC has
been switched off with the button;
ADB-X is operational. ADB-X control
intervention is not indicated.
DSC is switched off, and ADB-X reverts
to its maximum torque-transfer mode.
>
In the following rare situations, it may
be effective to deactivate the DSC for a
brief period:
>
When rocking the vehicle or starting
off in deep snow or on loose surfaces
If the indicator lamp fails to go out
when you press the DSC button
>When driving with snow chains.
again, this indicates a malfunction in
the DSC and ADB-X systems; the sta-
bility enhancement functions are no
longer available.<
To maintain vehicle stability,
always drive with the DSC acti-
vated whenever possible.<
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 325i, BMW 325xi, BMW E46 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)