FEATURESOFYOURHYUNDAI1
87
NOTE:
o
B260D04O-AAT
4. SCAN Button
1.
Playing CD
If the CD does not operate properly or
if the ER2 fault code is displayed, use
one of two methods to reset the CD
deck function.
- Remove the audio fuse for 5 minutes.
Then, reinstall the audio fuse.
- Diconnect the negative terminal of
the battery and wait 5 minutes. Then,
reconnect the negative battery termi-
nal.
To assure proper operation of the unit,
keep the vehicle interior temperature
within a normal range by using the
vehicle's air conditioning or heating sys-
tem.
When replacing the fuse, replace it with
a fuse having the correct capacity.
The preset station frequencies are all
erased when the car battery is discon-
nected. Therefore, all data will have to be
set again if this should occur.
Do not add any oil to the rotating parts.
Keep magnets, screwdrivers and other
metallic objects away from the tape
mechanism and head.
o
o
Press the SCAN button to playback the first
seconds of each track.
Press the SCAN button again within 10 sec.
when you have reached the desired track.
o
o
Insert the CD with the label facing upward.
Insert the CD to start CD playback, during
radio operation.
When a disc is in the CD deck, if you press
the CD button, the CD player will begin
playing even if the radio is being used.
The CD player can be used when the ignition
switch is in either the "ON" or "ACC" posi-
tion.
10
o
o
5.
REPEAT Button
o
To repeat the track you are currently listen-
ing to, press the RPT button. To cancel,
press again.
If you do not release RPT operation when
the track ends, it will automatically be re-
played.
o
o
2.
FF/REW (
/
)
If you want to fast forward or reverse through
the compact disc track, push and hold the FF
(
When you release the button, the compact disc
player will resume playing.
This process will be continued until you push
the button again.
o
o
) or REW (
) button.
6.
EJECT Button
When the EJECT button
CD loaded, the CD will eject.
is pressed with a
3.
TRACK UP/DOWN
o
o
o
The desired track on the disc currently being
played can be selected using the track num-
ber.
o
Press
once to skip forward to the beginn-
ing of the next track. Press once to skip
back to the beginning of the track.
This equipment is designed to be used
only in a 12 volt DC battery system with
negative ground.
| Categories | Hyundai Accent Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Accent 1.6 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Accent |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.67 out of 5)
Automotive readers have rated 2004 Hyundai Accent Owners Manual 4.7 out of 5.0 based on 3 product reviews. Came here to find the fuse box.
There is no part number for manual transmission fluid.