Maintenance and Care
Owner Maintenance
Automatic Transaxle Fluid
(ATF)
WARNING
Sudden Vehicle Movement:
Shifting the shift lever without first
depressing the brake pedal is
w Inspecting Automatic Transaxle
Fluid Level
dangerous. The vehicle could move
suddenly and cause an accident.
Make sure the brake pedal is applied
before shifting the shift lever.
The automatic transaxle fluid level should
be inspected regularly. Measure it as
described below.
The volume of fluid changes with the
temperature. Fluid must be checked at idle
without driving at normal operating
temperature.
4.
With the engine still idling, pull out the
dipstick, wipe it clean, and put it back.
5.
Pull it out again.
The proper fluid level is marked on the
dipstick as follows.
CAUTION
•
•
Low fluid level causes transaxle
slippage. Overfilling can cause
foaming, loss of fluid, and transaxle
malfunction.
Full
A
Full
Use specified fluid (page 10-4). A
nonspecified fluid could result in
transaxle malfunction and failure.
Low
B
Low
1.
Park on a level surface and set the
parking brake firmly.
2.
3.
Idle the engine about two minutes.
Push down on the brake pedal.
Fluid hot scale A
When the vehicle has been driven and the
fluid is at normal operating temperature,
about 65°C (150°F), the level must be
between Full and Low.
Move the shift lever through all ranges
and set it at P.
Fluid cold scale B
When the engine has not been running
and the outside temperature is about 20°C
(70
Low.
°F), the level must be between Full and
8-20
| Categories | Mazda 3 Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2004 Mazda 3 Owners Manual 3.0 out of 3.0 based on 1 product reviews. i like the manual it is very helpful. keep up the good work