>
Park P:
Press button P, arrow 2.
N Neutral
Select only if your journey is interrupted for
a long period.
The selector lever immediately returns to
the center position when released.
>
>
From D press the selector lever up
With the vehicle stationary, press the
brake pedal before shifting out of P
From R press the selector lever down.
Note the arrows indicating direction in the
range display.
or N; the shift command will not be exe-
cuted unless the brake is applied: shiftlock.
To prevent the vehicle from creeping after
you select a range, maintain pressure on
the brake pedal until you are ready to start.
You can activate the Automatic Hold fea-
ture to suppress the vehicle's tendency to
creep, refer to page 65.<
N remains engaged whenever the
remote control remains in the ignition
lock after the ignition is switched off. This
function is useful in automatic car washes,
etc.
After approx. 30 minutes the system auto-
matically engages P. Remember to observe
the Check Control for status messages.
Switching off engine refer to page 63.<
Shift commands are transmitted electroni-
cally. To help avoid malfunctions, each
command undergoes a plausibility check
prior to execution.
D Drive, automatic driving position
Remember to observe the Check Control
for status messages.
This is the range recommended for normal
vehicle operation. All forward gears are
available.
You can find additional information on the
Check Control on page 83.
Under normal operating conditions, fuel
consumption is lowest when driving in
position D.
To prevent the vehicle from rolling,
always select position P and engage
the parking brake before leaving the vehicle
with the engine running. Note the informa-
tion provided in the Info Display.
Never leave an unattended vehicle with the
engine running, as such a vehicle repre-
sents a potential safety hazard.<
Kick-down
The kick-down mode provides maximum
acceleration.
Press the accelerator pedal beyond the
full-throttle resistance point.
P Park
Select only when the vehicle is stationary.
The transmission lockout prevents the rear
wheels from turning. The lockout disen-
gages when you press the selector lever
toward D, N or R while the engine is run-
ning.
P is engaged automatically as soon as
you switch off the engine unless N is
engaged and the remote control is inserted
in the ignition lock, refer to page 63.<
R Reverse
Select only when the vehicle is stationary.
69
Online Edition for Part-No. 01 41 0 159 154 - �09/04 BMW AG
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 745i, BMW 745Li, BMW 760i, BMW 760Li, BMW E65, BMW E66 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2005 BMW 7-Series 745i 745Li 760i 760Li E65 E66 Sedan Owners Manual 5.0 out of 5.0 based on 1 product reviews. I want the bmw 730il manual