M Sports seat*: positioning the tether
strap
To gain access to this anchor fitting, lift the
plastic plug with the help of a screwdriver, see
arrow.
1.
2.
3.
Unhook the roller-blind cover, if necessary,
and let it retract.
Use the tether strap anchor fittings only
to fasten child-restraint systems in place;
otherwise the anchor fittings could be dam-
aged.<
Guide the tether strap through the holder at
the top of the head restraint.
Clip the tether strap onto the anchor fitting.
Positioning the tether strap
LATCH child-restraint fixing system*
LATCH: Lower Anchor and Tethers for CHil-
dren.
When installing a LATCH child seat, com-
ply with the child seat manufacturer's
operating and safety instructions.<
Anchor points
1.
Unhook the roller-blind cover, if necessary,
and let it retract.
2.
3.
Push the head restraint upward.
Guide the tether strap through the head
restraint support posts.
4.
5.
Push the head restraint into its lowest posi-
tion.
The anchor points for the LATCH child seat can
be found at the locations marked by the arrows.
Clip the tether strap onto the anchor fitting.
Carefully push the child seat brackets through
the gap between the seat cushion and backrest
cushion at the designated locations, see
arrows.
37
Online Edition for Part-No. 01 41 0 012 083 - © 04/06 BMW AG
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW 3.0i, BMW 3.0si, BMW E86, BMW Z4 3.0i |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)