Lights
Replacingtail/brake/turnsignal/backuplampbulbs
Sedan
The tail lamp, brake lamp, turn
signal lamp and backup lamp bulbs
are located in the same portion of
the tail lamp assembly. Follow the
same steps to replace either bulb.
1.
Make sure headlamp switch is in
OFF position and open trunk and
remove two plastic mushroom nuts,
five push pins and the plastic cover
from inside the trunk to access the
lamp assembly.
2.
Carefully pull the carpet away to
expose the lamp assembly hardware.
3.
Remove three nut and washer
assemblies and the lamp assembly
from the vehicle.
4.
Remove the bulb socket by
rotating it counterclockwise, then
pulling it out of the lamp assembly.
5.
Pull the bulb from the socket and
push in the new bulb.
6.
Install the bulb socket into the
lamp assembly by rotating it
clockwise.
7.
assemblies ensuring the washers on the nuts are flush with the body to
prevent water from entering the trunk.
Install the lamp assembly on the vehicle with three nut and washer
8.
Carefully push the carpet back in to place and install the plastic cover
inside the trunk with five push pins and two plastic mushroom nuts.
42
2005
Taurus(tau)
OwnersGuide(post-2002-fmt)
USA(fus)
| Categories | Ford Manuals, Ford Taurus Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(5 votes, average: 4.4 out of 5)
Automotive readers have rated 2005 Ford Taurus Owners Manual 4.4 out of 5.0 based on 5 product reviews. Thank you for providing this for download
Your manual was great, however difficult to locate power window fuse location due to Ford's descriptions.
don't have my own neeed to see whats going on and was told this was the site to go on fuel not getting through possibly to do with anti theft?
Check transmission light is