FEATURES/OPERATIONS
Lights & turn signals
Windows
Headlights
Driver side
Window
lock
switch
Window operation
Indicator light
Indicator light
To open or close Push down or pull up on the switch.
Automatic operation (Driver side only) Push the
switch completely down or pull it completely up and
release to fully open or close. To stop mid-way,
lightly push the switch in the opposite direction.
Parking, tail, license plate,side marker and
instrument panel lights Twist the lever knob to
position 1.
Headlights and all of the above Twist the lever
knob to position 2.
“AUTO”* Twist the lever knob to position 3.
High beams Push the lever forward.
Low beams
Window lock switch
Push the switch to deactivate the passenger windows.
Window-Back
High beam flasher Pull the lever toward you.
Operating from inside Operating from outside
Note: Daytime running light system* Automatically
turns on the headlights at reduced intensity.
*If installed
Automatic light cutoff system
Automatically turns off the lights when the driver’s
door is opened with the key in “ACC” or “LOCK.”
To open Push and hold “
To close Push and hold “
.”
.”
Turn signals
To open Turn the key counterclockwise and hold.
To close Turn the key clockwise and hold.
Tilt and telescopic (if installed) steering wheel
Right or left turn Push the lever up or down.
Lane change Move the lever up or down to
position 8 and hold.
To change the steering wheel angle Hold the
steering wheel, pull the lock release lever, tilt to
the desired angle then release the lever.
To change the steering wheel column length
Push the lock release lever down, set the desired
length, and return the lever to its locked
position.
Clock
To reset the hour Push “H.”
To reset the minute Push “M.”
To zero out minutes Push “ :00.”
Note: Do not attempt to adjust while the vehicle
is in motion.
12
13
| Categories | Toyota 4Runner Manuals, Toyota Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)