SAFETY AND
EMERGENCY FEATURES
Doors-Child safety locks
VSC1 (Vehicle Stability Control) (if installed)*
Helps provide comprehensive control of the Anti-lock
2
Brakes, Brake-Assist , Traction Control, engine control
and other systems. This system helps maintain control
of the vehicle under adverse conditions.
1
Vehicle Stability Control (VSC) is an electronic system designed to
help the driver maintain vehicle control under adverse
conditions. It is not a substitute for safe driving practices.
Factors including speed, road conditions and driver steering
input can all affect whether VSC will be effective in preventing
loss of control.
To lock the inside handle Move the lever to “LOCK,”
allowing the door to be opened only from the
outside.
Seat belts
2
Brake-Assist is designed to help the driver take full advantage of
the benefits of ABS (Anti-lock Brake System). It is not a
substitute for safe driving practices. Braking effectiveness also
depends on proper brake-system maintenance and tire and road
conditions.
Take up
slack
Too high
Tire Pressure Warning System (if installed)*
Keep as low on
hips as possible
Designed to provide warning when tire pressure of
any one of the tires is critically reduced while the
vehicle is moving. It must be re-initialized by pushing
and holding the “ ” button if indicator light blinks
once every 3 seconds, and/or after replacing or
rotating tires or wheels. See page 3 of this guide for
switch location.
If belt is fully extended, then retracted even
slightly, it cannot be re-extended beyond that point,
unless fully retracted again. This feature is used to
help hold child restraint systems securely.
To find more information about seat belts, and how
to install a child restraint system, refer to the
Owner’s Manual.
Airbag-Supplemental Restraint System
The Airbag Supplemental Restraint System (SRS) front,
side* and side curtain* airbags are designed to provide
further protection for the driver and outboard
passenger in addition to the primary safety protection
provided by the seat belts.
Seat belt warning system
If you don’t fasten your seat belt, and the vehicle
reaches a speed of over 5 mph, an alarm will sound
to remind you to fasten your seat belt. For safety,
please wear a seat belt at all times.
Front passenger occupant classification system
Monitors the load on the front passenger seat, and
detects if the seat belt is fastened to determine
passenger occupancy and size of passenger, if any.
Seat belts-Shoulder belt anchor
Lock release
button
For the system to correctly determine conditions
-Do not place heavy objects on the front passenger
seat.
-
Do not attach a seatback table to the front
passenger seatback.
Do not put weight on the front passenger seat by
putting your hands or feet on the front passenger
seatback from the rear passenger seat.
-
To raise Slide the anchor upward.
To lower Squeeze the lock release button and slide
the anchor downward.
Please read the following caution boxes, and refer to
the Owner’s Manual for more details.
*If installed.
19
18
| Categories | Toyota Corolla Manuals, Toyota Manuals |
|---|---|
| Tags | Toyota Corolla 1.8 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)