2006 BMW 3-Series M3 E46 M3 Owners Manual

148
Jump-starting
3.
Connect the second terminal clamp
of the plus/+ jumper cable to the
3. Allow the engines to run for several
minutes
positive terminal of the battery or to a    4. Disconnect the jumper cables in
jump-starting terminal in the vehicle
to be started
reverse sequence.
Have the battery recharged at your
BMW center as required.
4.
Your BMW is equipped with a special
nut – see arrow 2 – to serve as the
ground or negative terminal.
Attach a terminal clamp of the
minus/– jumper cable to the negative
terminal of the support vehicle's bat-
tery or to a suitable ground on its
engine or bodywork
Do not use spray starter fluids to
start the engine.<
5.
Attach the second terminal clamp of
the minus/– jumper cable to the neg-
ative terminal of the battery or to a
suitable ground on the engine or
bodywork of the vehicle to be
started.
Starting the engine
1.
Start the engine of the support vehi-
cle and let it run for several minutes
at a slightly elevated engine idle
speed
2.
Start the engine of the other vehicle
as usual.
If the first start attempt is not suc-
cessful, wait a few minutes before
another attempt in order to allow the
discharged battery to recharge
Online Edition for Part-No. 01 41 0 158 515 - �09/04 BMW AG
Product Specification
CategoriesBMW 3-Series Manuals, BMW Manuals
Tags,
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 174 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field