2006 Kia Rio Owners Manual

In case of an emergency
Connecting jumper cables
Jump starting procedure
1.
Make sure  the  booster battery  is  12-
volt  and  that its  negative  terminal  is
grounded.
Connect cables in numerical order and  disconnect in reverse order.
2.
If  the  booster   battery  is  in  another
vehicle,  do  not allow  the  vehicles  to
touch.
Jumper Cables
3.
4.
Turn  off   all   unnecessary   electrical
loads.
Connect the jumper cables in the exact
sequence shown  in the previous illus-
tration.  First  connect   one  end  of  a
jumper cable to the positive terminal of
the  discharged battery  (1), then  con-
nect the  other end to  the positive  ter-
minal on the booster battery  (2).
Booster battery
Discharged battery
5.
Proceed  to  connect  one  end  of  the
other jumper cable to the negative ter-
minal of  the booster  battery  (3), then
the  other  end  to  a  solid,  stationary,
metallic point (for example, the  engine
lifting  bracket) away  from  the battery
(4).
Do  not connect  it to  or  near any
1JBA6002
part  that  moves  when  the engine  is
cranked.  Do not  connect  the  jumper
cable from the negative terminal of the
booster battery  to the  negative termi-
nal of the discharged battery.
6
4
Product Specification
CategoriesKia Manuals, Kia Rio Manuals
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 220 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field