MAINTENANCE
For mixture percentage, refer to the 1. Turn the coolant reservoir cap 5. Run the engine at idle with the
following table
counterclockwise to remove it.
coolant reservoir cap off. Slowly
add additional coolant as neces-
sary.
6. At this point, wait until the engine
reaches normal operating temper-
ature. Depress the accelerator two
or three times; then add coolant as
required. Be careful not to burn
yourself.
Replace the coolant reservoir cap.
Inspect all connections for leaks
and recheck the coolant level in the
reservoir. Recheck again after a
few days and add coolant as nec-
essary.
2.
Loosen the radiator drain plug and
drain the coolant into a suitable
container.
With the plug loose, flush the sys-
tem with running water.
Mixture Percentage
(volume)
Ambient Temperature
3.
4.
Coolant
Water
Solution
Drain the system completely and
retighten the drain plug. Add the
-15°C (5°F)
35
40
50
60
65
60
50
40
-25°C (-13°F)
necessary amount of
ethylene-
7.
glycol-based coolant and water to
provide the required protection
against freezing and corrosion. In
extremely cold climates, add ethyl-
ene-glycol based coolant in accor-
dance with the instructions of the
manufacturer.
-35
°C (-31°F)
°C (-49°F)
-45
CAUTION
To prevent burning yourself, do
not remove the radiator cap or
loosen the drain plug while the
engine is hot.
7-13
Categories | Kia Manuals, Kia Sorento Manuals |
---|---|
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(7 votes, average: 4.14 out of 5) Automotive readers have rated 2006 Kia Sorento Owners Manual 4.1 out of 5.0 based on 7 product reviews.
I haven't seen it yet so not much of words to describe the usefulness
I like this it ahs everything I need to get my kia rolling agin
Good ideau for posting this.
Don't yet know how it will work.
Mange tal for det