Driving tips
Reprogramming a single
HomeLink button
Gate operator programming &
canadian programming
Accessories
If you would like additional informa-
To program a device to HomeLink During programming, your hand-held tion on the HomeLink Wireless
using a HomeLink button previously transmitter may automatically stop Control System, HomeLink compati-
1
2
3
4
5
6
7
8
9
trained, follow these steps:
transmitting. Continue to press and ble products, or to purchase other
hold the HomeLink button (note accessories such as the HomeLink®
1.
Press
HomeLink button. Do NOT release
until step 4 has been completed.
When the indicator light begins to
flash slowly (after 20 seconds),
position the hand-held transmitter
and
hold
the
desired
steps
2
through
4
in
the
Lighting Package, please contact
the internet at www.homelink.com.
“
Programming” portion of this text) HomeLink at 1-800-355-3515 or on
while
you
press
and
re-press
2.
(“cycle”) your handheld transmitter
every two seconds until the frequen-
cy signal has been learned. The indi-
cator light will flash slowly and then
rapidly after several seconds upon
successful training.
1
to 3 inches away from the
HomeLink surface.
3.
4.
Press and hold the hand-held
transmitter button (or press and
“
cycle” as described in
Canadian Programming” above).
-
✽
NOTICE
“
If programming a garage door
opener or gate, it is advised to
The HomeLink indicator light will
flash, first slowly and then rapidly.
When the indicator light begins to
flash rapidly, release both buttons.
unplug
the device during the
“cycling” process to prevent possi-
ble motor burn-up.
The previous device has now been
erased and the new device can be
activated by pushing the HomeLink
button that has just been pro-
grammed. This procedure will not
affect
any
other
programmed
HomeLink buttons.
5
49
| Categories | Kia Manuals, Kia Sportage Manuals |
|---|---|
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)