BASIC HYBRID VEHICLE OPERATION
Unlocking operation
Turning the Hybrid System ON
Pressing down on the brake pedal
Front door
Rear hatch
NOTE: After unlocking, if a door is not opened
within thirty (30) seconds, all doors will relock for
safety. Refer to your Owner’s Manual, and the
following section of this guide for Smart Key
unlocking programmable options.
Smart Key system cancel switch
Push
Insert key*.
Depress the brake pedal, and push the “POWER”
button briefly and firmly.
The “READY” light will blink. After a few
seconds, when the light remains ON and a beep
sounds, you may begin driving.
ON
OFF
Without pressing down on the brake pedal
The brake pedal must be depressed to turn the
Hybrid System on. If the brake pedal is not
depressed, pressing “POWER” will change the
operation mode in succession from:
NOTE: To conserve battery power, turn the Smart Key
system “OFF” when not using the vehicle for prolonged
periods of time. For more battery saving information,
refer to the Owner’s Manual for more details.
ACC
IG-ON
OFF
Accessories such as radio will operate.
Ignition is on, Hybrid System is not
engaged.
Smart Key unlock functions (if equipped)
The Smart Key unlocking function can be
programmed to operate in 3 different modes when
Smart Key is activated. In all modes, grasping the
front passenger door handle will unlock all doors.
All systems OFF.
*It is not necessary to insert the ignition key (key
fob) if Smart Key system is installed and activated.
-To open driver side door only, grasp driver side
handle.
-To open all doors, grasp any door handle.
-To open driver side door or either back door
independently, grasp the handle.
Refer to the Owner’s Manual for more information
on this feature, and how to change modes.
6
7
| Categories | Toyota Manuals, Toyota Prius Manuals |
|---|---|
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.