Driving your vehicle
Automatic transaxle operation
For smooth operation, depress the brake
pedal when shifting from N (Neutral) to a
forward or reverse gear.
CAUTION
The highly efficient automatic transaxle
has 4 forward speeds and one reverse
speed. The individual speeds are select-
ed automatically, depending on the posi-
tion of the shift lever.
All normal forward driving is done with
the shift lever in the D (Drive) position.
To move the shift lever from the P (Park)
position, the brake pedal must be
depressed with the ignition switch ON.
• To
avoid
damage
to
your
transaxle, do not accelerate the
engine in R (Reverse) or any for-
WARNING - Automatic
transaxle
ward
brakes on.
gear position with the
•
•
Always check the surrounding
areas near your vehicle for peo-
ple, especially children, before
putting a car into D (Drive) or R
(Reverse).
Before leaving the driver’s seat,
always make sure the shift lever
is in the P (Park) position; then
set the parking brake fully and
shut the engine off. Unexpected
and sudden vehicle movement
can occur if these precautions
are not followed in the order iden-
tified.
•
•
When stopped on an upgrade, do
not hold the vehicle stationary
with engine power. Use the serv-
ice brake or the parking brake.
Do not shift from N (Neutral) or P
(Park)
into
D
(Drive),
or
R
✽
NOTICE
(Reverse) when the engine is
above idle speed.
The first few shifts on a new vehicle, if
the battery has been disconnected, may
be somewhat abrupt. This is a normal
condition, and the shifting sequence will
adjust after shifts are cycled a few times
by
the
TCM
(Transaxle
Control
Module).
5
11
Product Specification
Categories | Hyundai Elantra Manuals, Hyundai Manuals |
---|---|
Tags | Hyundai Elantra 2.0 |
Model Year | 2007 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Elantra |
Document File Type | |
Copyright | Attribution Non-commercial |