2
DRIVING YOUR HYUNDAI
TO START THE ENGINE
KEY POSITIONS
4
C030A01HP-GAT
Combination Ignition Switch
C040A02A-AAT
!
!
WARNING: (Diesel only)
o If your Hyundai is equipped with a
manualtransmission,placetheshift
lever in neutral and depress the
clutch pedal fully.
o If your Hyundai has an automatic
transmission, place the shift lever in
"P" (park).
o To start the engine, insert the igni-
tion key and turn it to the "START"
position. Release it as soon as the
engine starts. Do not hold the key in
the "START" position for more than
WARNING:
To ensure that sufficient vacuum
exists within the brake system dur-
ing cold weather start-up condi-
tions, it is necessary to run the
engine at idle after starting accord-
ing to the following table.
The engine should not be turned
off or the key removed from the
ignition key cylinder while the ve-
hicle is in motion. The steering
wheel is locked by removing the
key.
Ambient temp.
Warm up time
Above -15°C (5°F) 3 min. or longer
Below -15°C (5°F) 6 min. or longer
ACC
Afterstartingtheengine,donotdrive
the vehicle until the brake vacuum
15
seconds.
LOCK
ON
warning light
has turn-ed off.
NOTE:
Failuretocarryouttheaboveproce-
dure may result in the need to apply
greater pedal pressure in order to
effectthenecessarybrakingeffort.
For safety, the engine will not start
if the shift lever is not in "P" or "N"
Position(AutomaticTransmission).
START
C040A01E
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)