7.
Turn the controller until "Set time" is
selected and press the controller.
1.
Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the date and the word "SET".
Adjusting settings
8.
Turn the controller to set the hours and
press the controller.
2.
3.
4.
5.
6.
Press button 2.
Use button 1 to set the day of the month.
Press button 2 to confirm the entry.
Set the month and the year in the same way.
9.
Turn the controller to set the minutes and
press the controller.
The system accepts the new time.
Press button 2.
Switching on the hour signal*
The system stores the new date.
You will hear three tones just before each full
hour.
Via iDrive
iDrive, for operating principle refer to page 16.
Select "Hour memo" and press the controller.
The hour signal is activated.
1.
Press the
button.
This opens the start menu.
Setting the 12h/24h format
2.
3.
Press the controller to open the menu.
1.
Select "Time format" and press the control-
ler.
Turn the controller until "Settings" is
selected and press the controller.
2.
Select the desired format and press the
controller.
4.
5.
Select "Time / Date" and press the control-
ler.
Select "Date" and press the controller.
Date
The settings are stored for the remote control
currently in use, refer also to Personal Profile on
page 28.
Setting the date
In the instrument cluster
To set the DD.MM or MM/DD date format, refer
to Setting the date format.
6.
7.
Select "Set date" and press the controller.
The first setting of the date display is now
highlighted, in this case the day.
Turn the controller to make the adjustment.
76
Online Edition for Part no. 01 41 0 014 954 - © 02/08 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E88 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)