One wheel yellow
reset is completed during your drive, and
can be interrupted at any time. When driving
resumes, the reset is continued automati-
cally. The indicator lamp goes out after the
system reset is completed.
There is a flat tire or substantial loss of tire pres-
sure in the indicated tire. A message appears on
the Control Display.
All wheels yellow
Via iDrive
There is a flat tire or substantial loss of tire pres-
sure in several tires. A message appears on the
Control Display.
iDrive, for operating principle refer to page 16.
1.
2.
3.
"Vehicle Info"
"Vehicle status"
"Reset TPM"
Gray
The system cannot detect a puncture.
Possible reasons for this:
>
>
TPM is being reset
Temporary malfunction caused by systems
or devices using the same radio frequency
>
Malfunction
Resetting the system
Each time a tire inflation pressure has
been corrected or a wheel or tire has been
changed, reset the system.<
4.
5.
6.
Start the engine - do not drive away.
Start the initialization using "Reset TPM".
Start to drive.
The tires are shown in gray and "Resetting
TPM..." is displayed.
Using the button in the center console
1.
2.
Start the engine, but do not start driving.
Press the button for approx. 4 seconds until
the warning lamp in the instrument cluster
lights up yellow. Warning lamp, refer to
Message for low tire inflation pressure on
page 80.
After driving a few minutes, the set inflation
pressures in the tires are accepted as the target
values to be monitored. The system reset is
completed during your drive, and can be inter-
rupted at any time. When driving resumes, the
reset is continued automatically. On the Control
Display, the tires are shown in green and
"Status: TPM active" is displayed again.
The message "Resetting TPM..." appears
on the Control Display for several seconds.
If a flat tire is detected while the system is
resetting and determining the inflation
pressures, all wheels on the Control Display are
displayed in yellow. The message "Tire low!" is
shown.<
Message for low tire inflation pressure
The warning lamps come on in yellow
and red. A message appears on the
Control Display. In addition, a signal
sounds. There is a flat tire or substan-
tial loss of tire pressure.
3.
Start to drive.
After driving a few minutes, the set inflation
pressures in the tires are accepted as the
target values to be monitored. The system
80
Online Edition for Part no. 01 41 2 600 934 - © 08/08 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E90, BMW M3 Manuals |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 BMW 3-Series M3 E90 Owners Manual 4.0 out of 4.0 based on 1 product reviews.