Side-mounted turn signals
6. Install in the reverse order.
W5W bulb, 5 watts
Tail lamps
1.
Use finger pressure against the rear end of
the lamp, refer to arrow, to press it forward
for removal.
>
Turn signal lamp:
PY21WSV bulb, 21 watts
>
Other bulbs:
W16W bulb, 16 watts
2.
3.
Apply gentle pressure to the bulb while
turning it to the left and pull it out.
1
2
3
4
5
Brake lamp
Install in the reverse order.
Parking lamp/rear lamp, LED
Turn signal
Front fog lamps
H11 bulb, 55 watts
Backup lamp
Always wear gloves and eye protection –
Rear lamp, LED
the atmosphere inside the H11 bulb is
pressurized. Failure to observe this precaution
can lead to injuries should the bulb be dam-
aged.<
In the event of a defect involving the lamps 2, 4
and 5, please consult your BMW Sports Activity
Vehicle Center.
1.
Pull the cover in front of the fog lamp for-
ward.
Changing
Open the flap in the side panel, refer to page 78.
2.
Loosen the screw, refer to arrow, pivot
headlamp out on this side and remove
toward the front.
Turn signal lamp:
1.
Turn bulb holder to the left, refer to arrow 1,
and remove.
3.
Turn the lamp base at the back of the head-
lamp to the left and remove it.
2.
Apply gentle pressure to the bulb fitting
while turning it to the left, remove and
replace.
4.
5.
Disconnect the cable connector.
Slide new bulb onto plug connector; be sure
it snaps firmly into place.
110
Online Edition for Part no. 01 41 0 014 250 - © 08/07 BMW AG
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW E83, BMW X3 3.0i, BMW X3 3.0si |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)