What to do in an emergency
CAUTION
Your vehicle has metric threads
on the wheel studs and nuts.
Make
certain
during
wheel
removal that the same nuts
removed are reinstalled - or, if
replaced, that nuts with metric
threads and the same chamfer
configuration
are
used.
Installation of a non-metric
thread nut on a metric stud or
vice-versa will not secure the
wheel to the hub properly and
will damage the stud so that it
must be replaced.
1
VQA4026
OVQ056008N
8.
9.
Insert the jack handle into the jack 11. Once the wheel lug nuts have
and turn it clockwise, raising the been tightened, lower the vehicle
vehicle until the tire just clears the fully to the ground and continue to
ground. This measurement is tighten the lug nuts until they are
approximately 1.2 in (30 mm). fully secured. Tighten the wheel
Before removing the wheel lug lug nuts firmly in a “ X ” pattern.
nuts, make sure the vehicle is sta-
ble and that there is no chance for
movement or slippage.
Remove the wheel lug nuts by
turning them counterclockwise,
then remove the wheel.
Mount the spare tire into position
and install the wheel lug nuts
with the beveled edge inward.
Note that most lug nuts do not
have metric threads. Be sure to
use extreme care in checking
for thread style before installing
aftermarket lug nuts or wheels.
If you are unsure of the tightness
of the wheel lug nuts, have them
checked at the nearest service
station. The specified tightening
torque is 65-79 lb•ft (9~11 kg•m,
88-107 N•m). Improperly tight-
ened wheel lug nuts could cause
brake pedal vibration while brak-
ing.
If
in
doubt,
consult
an
Authorized Hyundai Dealer.
10.
5
17
Product Specification
Categories | Hyundai Entourage Manuals, Hyundai Manuals |
---|---|
Tags | Hyundai Entourage 3.8 |
Model Year | 2008 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Entourage |
Document File Type | |
Copyright | Attribution Non-commercial |
Good car with nice comfortable.
Mpg is good on highway.