Features of your vehicle
DRIVER POSITION MEMORY SYSTEM (IF EQUIPPED)
WARNING
5.
Push the sunroof control lever upward
until the sunroof operates as follows;
Never attempt to operate the driver
position memory system while the
vehicle is moving.
TILT DOWN → SLIDE OPEN →
SLIDE CLOSE
This could result in loss of control,
and an accident causing death,
serious injury, or property damage.
Then, release the lever.
When this is complete, the sunroof sys-
tem is reset.
Storing positions into memory
using the buttons on the door
OEN036100
D120101AEN
Storing driver’s seat positions
D120000AEN
A driver position memory system is pro-
vided to store and recall the driver seat,
outside rearview mirror and steering
wheel positions with a simple button
operation. By saving the desired positions
into the system memory, different drivers
can reposition the driver seat, outside
rearview mirror and steering wheel based
upon their driving preference. If the bat-
tery is disconnected, the position memo-
ry will be lost and the driving positions
should be restored in the system.
1.
Shift the transaxle shift lever into P
while the ignition switch is ON.
2. Adjust
the
driver
seat,
outside
rearview mirror and steering wheel to
positions comfortable for the driver.
3.
4.
Press SET button on the control panel.
The system will beep once.
Press one of the memory buttons (1 or
2)
within 5 seconds after pressing the
SET button. The system will beep
twice when memory has been suc-
cessfully stored.
✽
NOTICE
The buzzer sounds 10 times if there is a
malfunction of the memory system.
Have the driver position memory system
checked by an authorized HYUNDAI
dealer.
4
36
| Categories | Hyundai Manuals, Hyundai Veracruz Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Veracruz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)