Driving tips
3.
The HomeLink indicator light will Rolling code programming
flash, first slowly and then rapidly.
When the indicator light flashes
rapidly, both buttons may be
released. (The rapid flashing light
indicates successful programming
of the new frequency signal.)
Flashing
To train a garage door opener (or
other rolling code equipped devices)
with the rolling code feature, follow
these instructions after completing
the “Programming” portion of this
text. (A second person may make the
following training procedures quicker
& easier.)
1
2
3
4
5
✽ NOTICE
4.
Locate the “learn” or “smart” but-
ton on the device’s motor head
unit. Exact location and color of
the button may vary by product
brand. If there is difficulty locating
the “learn” or “smart” button, refer-
ence the device’s owner’s manual
Transmitter
Some gate operators and garage
door openers may require you to
replace step #3 with the “cycling”
procedure noted in the “C anadian
Programming” section of this docu-
ment.
MMSA5006
2
. Press and hold the button on the
HomeLink system you wish to
train and the button on the trans-
mitter while the transmitter is
approximately 1 to 3 inches away
from the mirror. Do not release the
buttons until step 3 has been com-
pleted.
or contact HomeLink at 1-800- 6
355-3515
or on the internet at
www.homelink.com.
7
5.
Press and release the “learn” or
“smart” button on the device’s
motor head unit. You have 30 sec- 8
onds to complete step number 6.
9
5
47
Categories | Kia Manuals, Kia Sportage Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(4 votes, average: 4.25 out of 5) Automotive readers have rated 2008 Kia Sportage Owners Manual 4.3 out of 5.0 based on 4 product reviews.
it is good to look up information. thanks
It's very goo. Thanks for uploading.
Really good manual, with good references
It's very goo. Thanks for uploading.